![]() |
![]() |
|||||||||||||||||||||||
We're part of the SOLUTION not the POLLUTION!
AquaTune!
Earth-friendly and GREEN!
For our European customers, you may now contact our European distributor! Please see the Distributor page.
Hover on image above and click play to watch video. |
"Water
Car" Put To The Test "At $2.50 a gallon, gas prices may be lower, but
they're definitely not cheap. So the Saving You Money Team is at it again,
testing a device that one company guarantees will improve your mileage
by 25 percent. Click to read full report, download the PDF of the report New at Aquatune.com - Calculate Your Fuel Savings Worksheet: Click here to download the excel spreadsheet to help you calculate your mileage savings. (Excel format.)
|
|
Would You Believe This?
|
Why Change the O2 (Oxygen Sensor)? One of the most overlooked maintenance items in your vehicles engine is the Oxygen Sensor (O2). A sluggish or non-working Oxygen Sensor will not set a code or cause the "check engine" light to come on unless it has a short inside. An aging Oxygen Sensor will cause a reduction in fuel economy and can cost many more dollars in fuel consumption. Just as we age gradually, so does an Oxygen Sensor. Therefore, its decline is not immediately noticed. As the function of the Oxygen Sensor is reduced, it will not read the air to fuel mixture correctly causing a misread of a lean condition and cause the engine to dump more fuel which in turn increases gas consumption and emissions to increase. Additionally, damage to the catalytic converter (CAT converter) can also occur. If a vehicle has problems with failing emissions tests, it may well be due to the fact that the O2 sensor needs to be replaced. This failing O2 sensor will cause an increase in emitting hydrocarbons and/or carbon monoxide. Manufacturers recommendations are that the O2 be changed every 60,000 miles. Our recommendations are to use only a factory O2 replacement (OEM). If the vehicle has O2 sensors both in front of the CAT converter and behind, change only those in front of the CAT converter as the one(s) behind are there simply for monitoring purposes. It is important to have a well functioning O2 so that the new fuel values will be read and received correctly.
|
|
|
Which kit is right for your application? The standard AquaTune kit is utilized on vehicles '96 and older (also known as having an OBDI computer) and with this kit, these vehicles will achieve everything that we promise. For vehicles '97 and newer (also known as having an OBDII computer), we recommend the AquaTunePlus kit. The newer vehicles have computers that are more sensitive and the AquaTunePlus unit does a better job in communicating with these vehicles to both read and receive this new, wider range of fuel values. This unit utilizes a downstream generator that must be hooked up to a 12 volt power source. Only two wires to hook up, one positive and one negative. The AquaThrustPlus unit we utilize primarily on racing vehicles as it is designed to increase the hp more than the others. Even with this unit you will still get an increase in mpg, however, not quite as much. This unit puts out a very potent injection charge. For vehicles that are at 5,000 feet altitude and over, it is highly recommended that you utilize the AquaThrustPlus unit.
|
||
For Fleet Account pricing contact Direct Sales - 903-527-3546 Made
in the Good Old USA
Military Discount |
||
| The Results Keep Pouring In! |
![]() |
| The AquaTune System installation is a breeze! |
|
|
|
©2001
Aquatune.com - all rights reserved. Questions about this site, email
administrator
|